.jpg)
|
Silicone Rubber Mould Release Agent
Minimun Order Quantity : 100kgs
Lead Time: 10-15days
Payment Terms: T/T, Western Union, L/C
Package: 15L/Barrel
| Tel: +86.755.8147.8876 ext 6032 | ||
| Fax: +86.755.8147.8372 | ||
| E-mail: sales@bondsil.com | ||
 |
 |
 |
Silicone Rubber Mould Release Agent CL-T10B
| Method of application: | |||||||||
|
• CL-T10 should spray on clear hot mould. And if it is the first time using, Thin and evenly spray three times at least, Every five minutes between the moisture volatilize.
|
|||||||||
|
• Coating should be used when the pressure constant spraying equipment,and Gun range mold surface 10 centimeters.
|
|||||||||
|
• Mold temperature should be higher than 90°C, order to achieve the best effect, Should spray in production temperature.
|
|||||||||
|
• In the process of production, according to requirements, Can repair spray CL-T10B, After heating can continue to produce.
|
|||||||||
|
• Do not spray too much in order to avoid CL-T10B in the mold of accumulation.
|
|||||||||
| Tips: | |||||||||
|
CL-T10B is added to the gross rubber in additive,which is Easy to add and disperse, Adding a
small amount of CL-T10B, Silica gel forming and metal contacting can form centrifugal membrane,
To improve the production and guarantee the quality of the products. This product is widely used in complicated shape of the silica gel moulded products and extrusion of silica gel wire.
|
|||||||||
|
Notice
|
|||||||||
|
1. When this product is using for secondary processing products, the amount shall not be longer
than 0.2%. otherwise, it will affect the printing ink adhesion.
2. CL-T10B is water products, its characteristic is not transferred to the silica gel products. a spray, multiple release. And the long-term using of to the mold scale is less
|
|
Special Silicone Adhesive and Silicone Primer |
|||
|
Name |
Model No. |
Packing |
Mark |
|
3kg/10kg |
Applied to double side tape(3M),mainly used for household appliances. |
||
|
1000ml |
Silicone surfactant, matched with instant glue, applied to P+R process widely. |
||
|
500ml |
Activating TPU surface,matched with 603,applied to keypad assembly process widely. |
||
|
500ml |
Activating silicone surface,matched with instant glue,applied to P+R process widely. |
||
|
1kg |
Applied to glue silicone to metal at room temperature or high temperature,applied to kitchenwares widely. |
||
|
100g/330g |
Silicone glue to silicone at room temperature,replaced Wacker E41& E43. |
||
|
100g |
Silicone glue to nylon or resin at room temperature, |
||
|
300g |
Applied to silicone medical parts.It will developing X-ray at room temperature cured.Such as catheter etc |
||
| Super Glue |
603 |
20g/1kg |
Used for silicone glue to metal or TPU materials.Strength
adhesion and low whity.(Match with primer)
|
| Instant Glue |
460 |
20g/1kg | Used for silicone glue to plastic materials.Strength adhesionand low whity.(Match with primer K770) |
| Instant Glue |
803 |
20g/1kg |
Low corrosion type instant glue |
|
CL-26A/B-1 |
1kg |
Silicone binding agent for PET at middle temperature. |
|
|
1kg |
Silicone glue to silicone at high temperature,high adhesion and fast curing. |
||
|
CL-24C |
1000ml |
Uncured silicone glue to nylon in mold.Applied to kitchen- wares widely. |
|
|
CL-26A/B |
1kg |
Uncured liquid silicone bonding with metal/nylon at middle temperature. |
|
|
CL-24 |
1000ml |
Uncured liquid silicone bonding with metal/nylon at high temperature. Applied to kitchenwares. |
|
|
Silicone Additives |
|||
|
5kg |
Applied to FDA and Medical grade needed silicone rubber products. |
||
|
kg |
Silicone conductive coating, mainly used for silicone tubber cable accessories. |
||
|
20kg |
The cured silicone products with odourless. |
||
|
20kg |
Frosting from the silicone rubber production process. |
||
|
20kg |
Paste, add in silicone rubber, easy to disperse and good peeling off effects. |
||
|
10kg |
Water, Spraying on the hot mold, well peeling off effects. |
||
|
Special silicone ink |
1kg |
Conductive ink,printing ink,coating ink,soft coating for protecting caseand keypads. |
|
|
10kg |
Liquid silicone pigment,applied to silicone resin and liquid silicone rubber asextrusion process based. |
||
|
1kg |
Paste silicone pigment. High temperature resistance and easy |
||
|
Silicone Rubber |
|||
|
|
25kg |
For all silicone products |
|
|
|
25kg |
For all silicone products |
|
|
|
25kg |
For all silicone products |
|
|
|
|
|
|
.jpg)
.jpg)
.jpg)
| Mr Michael Liu +86-13651458689/ sales888@klbsilicone.com |  |
