.jpg)
|
Silicone Release Agent CL-T10B
Minimun Order Quantity : 50kg
Lead Time: 10-15days
Payment Terms: T/T & Western Union & L/C
Package: 5kg/bottle, 1kg/bottle
| Tel: +86-0755-81478876-8018 | ||
| Fax: 0755-81478372 | ||
| E-mail: export@klbsilicone.com | ||
 |
 |
 |
Silicone Release Agent CL-T10B
Product Description
CL-T10B, one component water-based release agent for silicone rubber mold production. Excellent and durable releasing effect and would not transfer to the products. Once spraying, releasing for over 5 times. Long-term using will be good for cleaning the mold. Mainly used in the process of silicon rubber producing, especially for high quality requested silicone rubber releasing from the mold.
Application:
All kinds of silicone rubber
Physical Properties:
Appearance: Semitransparent liquid
density: 1.01 Kg/L
PH: 11.8
Method of Application:
CL - T10B mainly for spraying on a clean and hot mold. It can be diluted by pure water at ratio:1~2 times or depending on the spraying device.
1. Spraying at least 3 times with thinner and uniformly when using in the hot mold.
2. Each time waiting for 5 minutes will evaporate the water.
3. The spraying equipment should be Tensility Invariableness during the process, and it would better to keep 10 -- 25 cm from spray gun to mold.
4. When the mold temperature over than 95℃, spraying process should be based on
production temperatures.
5. Please according to your requirements to re-spray CL-T10B in the production process, until the mold heated.
6 .in order to avoid too much CL - T10B accumulation inside the mold, don't spray too much.
Storage and Treatment:
CL - T10B should be stored at 0-49 ℃ in the warehouse. Cover and tighten the containers when not in use to prevent evaporation or pollution. Please warming up the agent to room temperature before using if the stored temperature is lower, Proper usage won’t cause harm to human body.
Shelf Life: 12 months
Packing: 5litres/barrel and 15 liters/barrels
|
Special Silicone Adhesive and Silicone Primer |
|||
|
Name |
Model No. |
Packing |
Mark |
|
3kg/10kg |
Applied to double side tape (3M),mainly used for household appliances. |
||
|
K770-1 |
1000ml |
Silicone surfactant, matched with instant glue, applied to P+R process widely. |
|
|
500ml |
Activating TPU surface, matched with 603, applied to keypad assembly process widely. |
||
|
500ml |
Activating silicone surface, matched with instant glue, applied to P+R process widely. |
||
|
1kg |
Applied to glue silicone to metal at room temperature or high temperature, applied to kitchenwares widely. |
||
|
100g/330g |
Silicone glue to silicone at room temperature,replaced Wacker E41& E43. |
||
|
100g |
Silicone glue to nylon or resin at room temperature, |
||
|
KN-300XY |
300g |
Applied to silicone catheter etc medical parts.It will developing under X-ray at room temperature cured |
|
|
603 |
20g/1kg |
Used for silicone glue to metal or TPU materials.Strength adhesion and low whity.(Match with primer) |
|
|
460 |
20g/1kg |
Used for silicone glue to plastic materials. Strength adhesion and low whity.(Match with primer K770) |
|
|
803 |
20g/1kg |
Low corrosion type instant glue |
|
|
Silicone activator |
CL-26A/B-1 |
1kg |
Silicone binding agent for PET at middle temperature. |
|
Silicone Adhesive |
KL-301A/B |
1kg |
Silicone glue to silicone at high temperature,high adhesion and fast curing. |
|
CL-24C |
1000ml |
Uncured silicone glue to nylon in mold. Applied to kitchen-wares widely. |
|
|
CL-26A/B |
1kg |
Uncured liquid silicone bonding with metal/nylon at middle temperature. |
|
|
CL-24 |
1000ml |
Uncured liquid silicone bonding with metal/nylon at high temperature. Applied to kitchenwares. |
|
|
Silicone Additives |
|||
|
5kg |
Applied to FDA and Medical grade needed silicone rubber products. |
||
|
kg |
Silicone conductive coating, mainly used for silicone tubber cable accessories. |
||
|
20kg |
The cured silicone products with odourless. |
||
|
20kg |
Frosting from the silicone rubber production process. |
||
|
20kg |
Paste, add in silicone rubber, easy to disperse and good peeling off effects. |
||
|
10kg |
Water, Spraying on the hot mold, well peeling off effects. |
||
|
Special silicone ink |
1kg |
Conductive ink,printing ink,coating ink,soft coating for protecting case and keypads. |
|
|
Liquid silicone pigment |
10kg |
Liquid silicone pigment,applied to silicone resin and liquid silicone rubber asextrusion process based. |
|
|
Silicone pigment |
1kg |
Paste silicone pigment. High temperature resistance and easy to disperse. |
|
Contact Person
|
Ms. Jubilee 0086-13823747978 / export@klbsilicone.com
|
 |
