.jpg)
|
Heat Cured Silicone Adhesive
Minimun Order Quantity : 100kg
Lead Time: 7-15days
Payment Terms: T/T, Western Union, LC
Package: 1000ML/Bottle
| Tel: +86-0755-81478876-8018 | ||
| Fax: 0755-81478372 | ||
| E-mail: export@klbsilicone.com | ||
 |
 |
 |
Liquid Silicone Tackifier CL-24S-3
CL-24S-3 one component, clear liquid, single coating and easy to use. Characterized by water resistance, salt spray resistance, chemical resistance, oil resistance, solvent resistance and resistance for other severe rugged environment.
Also can be cured at room temperature, matched with KN-300 as the tackifier for metal(Al, Cu, Fe, SUS), plastic (PVC, PC ,ABS), ceramics, glass and so on.
Application:
Suit for addition type of Vinyl Polysiloxane or Additional Liquid Silicone Rubber stick with Carbon Steel, Stainless steel, Aluminum, Copper, Nickle, Zinc plated, PA(Nylon), PET(Polyethylene Terephthalate), Bakelite, PC(Polycarbonate),organic glass and other hard plastic materials at high temperature.
Usage ( Process one: High temperature curing)
1. Cleaning: cleaning surface with griding and degreasing or cleaned by solvent.
2. Gluing method: Brushing, dipping or spraying
3. Curing: Cured at room temperature for 30 minutes or baking at 90℃ for 5-15 minutes.
4. Activating Life: The process should better finished with one day after tackifier cured, if avoid to pollution, high temperature wet air contact, 5 days is max activating life.
5. Vulcanizing: Put the unvulcanized silicone rubber into the mold base material.
Note: The bonding effect will be better if brushed again with tackifier when bonding with organic glass material.
Usage ( Process two: Room temperature curing)
1. Cleaning: Cleaning surface with absolute ethyl alcohol,120# gasoline, toluene.
2. Surface treatment: Daubing CL-24S-3 on the base material surface uniformity by once.
Note: Daubing again will cause bad bonding effects.
3. Curing: Cured at room temperature for 30 minutes or baking at 90℃ for 5-15 minutes.
4. Gluing: Gluing thickness≤5mm, and then pressing less than 2 hours. The bonding adhesion will come to the best
Note:
1. Stored at a cool and dry place, away from the heat and open flame..
2. Solvent easy to volatilize, please fasten down the cover after using.
3. Working place should be fireproofing and ventilating, avoid long time inhalation and skin contact.
Storage: Stored at 25℃ for 8months with out open.
Packing: 1000ML/Bottle.
|
Special Silicone Adhesive and Silicone Primer |
|||
|
Name |
Model No. |
Packing |
Mark |
|
3kg/10kg |
Applied to double side tape(3M),mainly used for household appliances. |
||
|
1000ml |
Silicone surfactant, matched with instant glue, applied to P+R process widely. |
||
|
500ml |
Activating TPU surface,matched with 603,applied to keypad assembly process widely. |
||
|
500ml |
Activating silicone surface,matched with instant glue,applied to P+R process widely. |
||
|
1kg |
Applied to glue silicone to metal at room temperature or high temperature,applied to kitchenwares widely. |
||
|
100g/330g |
Silicone glue to silicone at room temperature,replaced Wacker E41& E43. |
||
|
100g |
Silicone glue to nylon or resin at room temperature, |
||
|
300g |
Applied to silicone medical parts.It will developing X-ray at room temperature cured.Such as catheter etc |
||
| Super Glue |
603 |
20g/1kg |
Used for silicone glue to metal or TPU materials.Strength
adhesion and low whity.(Match with primer)
|
| Instant Glue |
460 |
20g/1kg | Used for silicone glue to plastic materials.Strength adhesionand low whity.(Match with primer K770) |
| Instant Glue |
803 |
20g/1kg |
Low corrosion type instant glue |
|
CL-26A/B-1 |
1kg |
Silicone binding agent for PET at middle temperature. |
|
|
1kg |
Silicone glue to silicone at high temperature,high adhesion and fast curing. |
||
|
CL-24C |
1000ml |
Uncured silicone glue to nylon in mold.Applied to kitchen- wares widely. |
|
|
CL-26A/B |
1kg |
Uncured liquid silicone bonding with metal/nylon at middle temperature. |
|
|
CL-24 |
1000ml |
Uncured liquid silicone bonding with metal/nylon at high temperature. Applied to kitchenwares. |
|
|
Silicone Additives |
|||
|
5kg |
Applied to FDA and Medical grade needed silicone rubber products. |
||
|
kg |
Silicone conductive coating, mainly used for silicone tubber cable accessories. |
||
|
20kg |
The cured silicone products with odourless. |
||
|
20kg |
Frosting from the silicone rubber production process. |
||
|
20kg |
Paste, add in silicone rubber, easy to disperse and good peeling off effects. |
||
|
10kg |
Water, Spraying on the hot mold, well peeling off effects. |
||
|
Special silicone ink |
1kg |
Conductive ink,printing ink,coating ink,soft coating for protecting caseand keypads. |
|
|
10kg |
Liquid silicone pigment,applied to silicone resin and liquid silicone rubber asextrusion process based. |
||
|
1kg |
Paste silicone pigment. High temperature resistance and easy |
||
|
Silicone Rubber |
|||
|
|
25kg |
For all silicone products |
|
|
|
25kg |
For all silicone products |
|
|
|
25kg |
For all silicone products |
|
|
|
|
|
|
| Mr Michael Liu / sales888@klbsilicone.com |  |
