From:admin 2014-03-10

Medical Silicone Adhesive KN-300XY

Silicone adhesive/sealant (KN-300XY) one component, cure at room temperature. Ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Fluidity, electric insulativity, high performance of develops radiopaque.

Widely used for medical products, medical probes, silicone, PVC products, electron, electrical appliance, metal, Instrument, Machinery and Chemical etc.

Physical properties:
Appearance: Light Blue
Viscosity (25℃): 50000 mPa·s
Density: 1.10 g/ml
Surface drying time (25℃): 15 minutes
Curing time (25℃): 100 minutes
Tensile strength: 4.0 Mpa
Elongation: 300%
Hardness: 35±5 Shore A
Dielectric strength: 20 KV/mm
Stick effect: ≥2.0 Strong, (A1-A1, destroy underlying before separating)

KN-300XY is easy to cure once contacting with moisture, must be stored in a completely sealed place and away from the sunlight.
Please fasten down the cover after using to avoid the gel to be cured.
Have better use up within 10 minutes after open the adhesive at 25℃.
Avoid eye contact. If irritation occurs, flush the eye with lukewarm gently flowing water for 5 minutes or obtain medical attention.

100 g/piece. 300 g/piece.

Shelf life:
6 months at 25℃.